English
中文简体
Français
Español
Language The heater fan is installed away from flammable, explosive and other dangerous materials and gases; the heater fan is installed in a dry indoor place where rain and snow can be avoided, avoiding humidity; the heater fan is installed in a well-ventilated place, avoid using it in a sealed box; heating; The air inlet of the fan installation site should not be blocked, and the air outlet should be connected with a pipe covered with insulation material. Note that the pipe should not be too long, thin, or bent or bent too much. When the heater fan is installed, the air outlet must be tilted up by 15° and tilted down by 10°, and the left and right inclination of the body should be used within the range of 15°.
The heater, as the name suggests, is a device that can emit warm air. Generally speaking, the relatively high temperature is about 70-300"C. It contains three parts: heating, blowing, and temperature and blowing control and protection. It is suitable for all kinds of Types of forced circulation air heating for workshops and large buildings can bring the room temperature to the required temperature in a short period of time. It is an ideal heating equipment for modern plants, restaurants, theaters and other tall space buildings. The heater is composed of a ventilator, an electric motor and A combined unit composed of radiators.
It is suitable for all types of workshops where air is allowed to recirculate. When the air does not contain dust or flammable gas, it can be used as circulating air for heating. It is mainly composed of an air heater and a fan. The air heater dissipates heat, and then the fan sends out, so that the indoor air temperature can be adjusted.
